Why is it worth having this tool?

VIBRO SYSTEM for the chassis

OK-04.0100 Jackhammer + OK-04.0105 VAG knuckle screw puller: A4 / A6 / Passat

 

FILM:https://youtu.be/p3t6sii8TDA?t=212

FILM:https://youtu.be/jK7u5J6yw0o

The jackhammer and the steering knuckle screw puller allow you to work on a completely different level than when using traditional methods (hammer and striker). The undoubted benefits of using the VIBRO system tools for the undercarriage are:

• Save time
• Minimal interference with the structure and geometry of the suspension
• Much greater effectiveness of knocking out than traditional methods
• The material is not warming up
• No accidental damage from hammers and traditional knockouts

The hammer for the VIBRO system enables the use of various pullers and adapters, which increases the scope of application (the entire chassis and injectors). The impact performance of a hammer is difficult to determine and determine without first examining its capabilities. Therefore, it is imperative to see the videos (links opposite).

The hammer uses the energy of high-frequency impact, which translates into great effectiveness of work. Hammer parameters:

LSR 6933

Crimping tool for fuel connectors

 

FILM:https://youtu.be/rjTmj1OsGAA

The product allows you to make original fuel connections in accordance with the requirements of car manufacturers. Ideal for today's hard nylon low pressure fuel lines. It makes tight, safe joints, in accordance with the standards of car manufacturers.

No heating of the hoses, no troublesome pressing of soft tubes of smaller diameter onto slightly larger fuel connector stubs. It is impossible to do this normally on the website without nerves and waste of time. Whoever has tried knows best.

The professional Laser crimping machine is completely different. The system for fuel lines and connectors works cold, quickly and efficiently giving 100% tightness of the connection.

How it's working? You must watch the movie.

The fuel connector kit is LSR 37011 and is available separately

GV 311166000

Universal set for extracting injectors with a 12T actuator

FILM: https://youtu.be/ZiT2ZjLDUIc?t=2

Due to the high degree of complexity of the entire process of removing seized injectors, appropriate tools are required without disassembling the cylinder head. The presented set is distinguished by the fact that it is the most universal and durable set on the market, which allows you to service delivery vans and passenger cars. The GV 311166000 kit can be used to operate almost any engine except 2-3 designs. It is distinguished by a large number of adapters for mounting on Bosch, Denso, Siemens and Delphi injectors. Some of the adapters are double - for parallel operation, simultaneous when removing two injectors at the same time (mounted on one handle). The set has a 12 ton actuator and 2 screw actuators, but it is adapted to work with a 20 ton actuator and the innovative VIBRO FIGHTER vibrating device (GV 311230000).

When deciding on the purchase and operation of the GOVONI kit, the instructional video shown opposite is helpful, which shows the real work with seized injectors.